REDARC BCDC1225D

REDARC BCDC1225D

Note: This product will suit PX onwards Ford Rangers

The REDARC BCDC1225D In-vehicle Battery Charger is the next generation
in REDARC's DC to DC charging technology, with additional features that make
it the most advanced dual battery charger on the market.

Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1225D
will charge from both solar and the alternator simultaneously. And, with built-in
'Green Power Priority' it will select solar charging first, meaning less load on the
alternator.

Suitable for 12 or 24-volt vehicle systems, the unit will also work with either
standard or variable voltage/smart alternators.

The BCDC1225D features the same patented charging profiles as its predecessor
along with a new lithium charging profile making the unit suitable for charging AGM,
Gel, Standard Lead Acid, Calcium and LiFePO4 batteries.

For most applications, the BCDC1225D is suitable for battery bank sizes of 75-200AH.
For higher capacity needs of over 200AH, REDARC recommends the BCDC1240D.

Proven and Tested

The award-winning technology in the BCDC has been independently verified and
tested to ensure battery life is maximized, charging your battery to a proven 100%.

Trusted for its Australian design and tested for our unique conditions, the DC to DC
battery charger will work in the extreme heat of the Simpson Desert, up to 80C
and can handle deep water crossings at Cape York water, dust and vibration
are no match for this charger.

If you're heading out into the bush and want to get there and back again
safely you can trust REDARC.

Features

• Separate DC and solar charging inputs
• Maximizes the performance and life of your auxiliary battery
• Simultaneous DC and solar charging with Green Power Priority
• Suits 12V/24V standard and variable voltage/smart alternators
• Suitable for AGM, GEL, standard lead acid, calcium and LiFePO4 batteries
• Input (Operating) Voltage: 9 - 32VDC
• Output System Voltage: 12VDC
• Maximum Charging Voltage: 15.3V
• Output Current Rating (Cont.): 25A
• Input Current (Max.): 25A
• Input Fuse Rating: 40A
• Output Fuse Rating: 40A
• Standby Current Draw: <100mA
• Output Power: 375W
• Width (mm): 120
• Height (mm): 37
• Type Approval: CE
• Length (mm): 165
• Weight (kg): 0.85